Số điện thoại: +86-17606719387

Email: david@cnsuntech.com

Bơm thử áp suất

Stainless steel made water tank.

Bơm thử áp suất

DC-60A electrical pressure testing pump is powered testing pump for checking the pressure of pipeline in chemical industry, building, water, oil, coal, metallurgy, ship-building and other industries. It is heavy duty export to Germany.

Bơm thử áp suất

MÁY TUỐC ỐNG BANNER

Bơm thử áp suất
Model: DC-60A
Testing range: 60bar, 6Mpa, 580Psi
Water flow: 10L/min
Motor: 1800W

Bơm thử áp suất

Pressure testing pump is a machine driven by an electric motor for pressure testing of pipelines. Its working theory is mainly based on mechanical power transmission to fluid pressure. The specific process is as below:

Power Unit (motor drive)
Motor: Provides rotational power, usually using an AC motor, driven by a power supply.
Reduction mechanism: Some pumps are equipped with a reduction gearbox to convert the high speed of the motor into a low-speed, high-torque output suitable for pump operation.

Mechanical Transmission Unit (crankshaft connecting rod or cam mechanism)
Crankshaft-connecting rod mechanism: The motor rotates to drive the crankshaft, and the connecting rod converts the rotational motion of the crankshaft into the reciprocating linear motion of the plunger (piston) (similar to the piston motion of an internal combustion engine).
Cam mechanism: Some pumps use a cam to push the plunger to achieve periodic reciprocating motion.

Pressure Generation Unit (plunger pump principle)
Plunger reciprocating motion:
Suction stroke: When the plunger retreats, the volume of the pump chamber increases, forming a negative pressure, the water inlet valve opens, and the liquid (usually water or oil) is sucked into the pump chamber.
Pressure stroke: When the plunger moves forward, the volume of the pump chamber decreases, the water inlet valve is closed, the water outlet valve is pushed open, and the liquid is compressed and output to the system under test.
Multi-stage plunger: High-pressure test pumps often use multiple plungers in parallel (such as three-plunger pumps) to reduce flow pulsation and improve pressure stability through phase difference.

Pressure Control & Safety
Pressure relief valve: When the system pressure exceeds the set maximum value, the pressure relief valve will automatically open to protect the equipment and pipeline.
Pressure gauge/sensor: Real-time display or transmission of pressure data, some models are equipped with digital pressure controllers.
Pressure stabilization function: Maintain constant pressure through motor start and stop or frequency conversion control (such as automatic shutdown after reaching the target pressure, automatic pressure replenishment when the pressure drops).

Output Medium
Liquid medium (water or oil): Because liquid is incompressible, it can stably transmit high pressure and is usually used for static pipepressure testing.

Notes
Before use, check whether the pressure relief valve is normal to avoid overpressure explosion.
Liquid media must be completely exhausted to prevent gas compression from causing unstable pressure.

Through the above steps, the electric pressure test pump converts electrical energy into mechanical energy and then into fluid pressure to achieve high-precision pressure testing of the system under test.

 

 

Câu hỏi thường gặp

1. Chúng tôi là ai?

Chúng tôi là nhà sản xuất máy ống chuyên nghiệp, đặt tại thành phố Hàng Châu, Trung Quốc, thành lập năm 1989, gần cảng Thượng Hải, Ninh Ba và Nghĩa Ô. Chúng tôi chủ yếu xuất khẩu sang các nước Bắc Mỹ, Nam Mỹ, Nam Á và Trung Đông. Khách hàng của chúng tôi là nhà bán buôn dụng cụ điện và công ty chuyên thi công các dự án cụ thể như xây dựng đường ống chữa cháy, v.v.

2. Chúng tôi có thể đảm bảo chất lượng như thế nào?

Chúng tôi luôn kiểm tra ít nhất một ống trên mỗi máy ống trước khi giao hàng.
Một số mẫu máy hạng nặng của chúng tôi vẫn hoạt động tốt sau 7 hoặc 8 năm theo phản hồi của khách hàng. Chúng tôi bảo hành tất cả máy trong 12 tháng.

3. Bạn có thể mua gì từ chúng tôi?

Tất cả các loại dụng cụ ống nước và dụng cụ sửa ống nước, chẳng hạn như máy ren ống, máy tạo rãnh ống, máy cắt ống, máy cắt lỗ ống, máy uốn ống thủ công, ê tô ống cũng như máy bơm thử nghiệm.

4. Tại sao bạn nên mua hàng từ chúng tôi mà không phải từ các nhà cung cấp khác?

Chúng tôi tập trung vào các dụng cụ, máy móc và dịch vụ đường ống chất lượng cao. Chúng tôi có hầu hết các loại dụng cụ đường ống, hãy đặt hàng với chúng tôi, chúng tôi có thể kết hợp nhiều mẫu mã khác nhau trong một lô hàng. Ngôn ngữ hỗ trợ: Tiếng Anh, Tiếng Tây Ban Nha, Tiếng Nhật, Tiếng Bồ Đào Nha, Tiếng Đức, Tiếng Ả Rập, Tiếng Pháp, Tiếng Nga, Tiếng Hàn, Tiếng Hindi, Tiếng Ý

5. Thời gian giao hàng là bao lâu?

Vì điện áp của động cơ máy được tùy chỉnh nên thời gian giao hàng thường là 10-35 ngày sau khi thanh toán.

6. Bạn có thể đặt hàng bằng cách nào?

Chúng tôi chấp nhận thanh toán T/T trực tiếp vào tài khoản công ty và chúng tôi cũng có thể tạo đơn hàng trên trang web cửa hàng trực tuyến mà bạn có thể thanh toán cho chúng tôi bằng thẻ tín dụng.

7. Làm thế nào để vận chuyển?

Chúng tôi vận chuyển bằng đường biển đến cảng đối với đơn hàng số lượng lớn và chúng tôi cũng vận chuyển đến tận nhà đối với đơn hàng nhỏ.

8. MOQ là gì?

Về cơ bản, máy móc của chúng tôi không yêu cầu MOQ, chúng tôi có thể vận chuyển bất kỳ số lượng nào nhưng khuyến nghị nên đặt hàng với số tiền không dưới 2000,00 USD, vì theo kinh nghiệm của chúng tôi, nếu số lượng đặt hàng quá nhỏ thì việc cộng thêm phí vận chuyển đường biển khiến việc mua hàng từ nước ngoài trở nên không hiệu quả về mặt chi phí.

9. OEM có được chấp nhận không?

Có. Đối với đơn hàng số lượng lớn, chúng tôi có thể sản xuất biển tên và bao bì tùy chỉnh theo thương hiệu của khách hàng.

DANH MỤC SẢN PHẨM

viVietnamese
Cuộn lên đầu trang

Vui lòng để lại tin nhắn kèm địa chỉ email, nhân viên của chúng tôi sẽ liên hệ với bạn trong vòng 12 giờ.